Technical Information
- HDMI 1.3b, HDCP 1.1 and DVI 1.0 compliant
- Supports HDTV resolutions: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p
- When used with computers, supports DVI-D resolutions of up to 1920 x 1200
- Deep colour: 12bit
- Supports multi-channel digital audio
- Built-in EDID simulator and HDCP key-set allows each output to work independently when connecting to an HDMI display
- Can be cascaded up to 3 levels (depending on cable quality)
- Supports transmission distances of up to 20m (max. 10m in, 10m out)
- Each buffered output can run up to 10m @ 1920 x 1200 / 1080p
- Maximum bandwidth: 225MHz
- Input Port: 1 x HDMI Female
- Output Ports: 4 x HDMI Female
- Power and Sync LEDs
- 5V DC power supply included
- Dimensions: 143 x 65 x 25mm
Note on using DVI equipped devices with this HDMI Splitter
To connect devices equipped with DVI connections, you can use either modular DVI/HDMI adapters or DVI/HDMI adapter cables. Be aware that DVI is a 'video only' interface, audio signals are not supported when using DVI devices!
Why choose LINDY HDMI 1.3b devices?
Higher speed: HDMI 1.3 increases its single-link bandwidth to 340 MHz (10.2 Gbps) to support the demands of future HD display devices, such as higher resolutions, Deep Colour and high frame rates. In addition, built into the HDMI 1.3 specification is the technical foundations that will let future versions of HDMI reach significantly higher speeds
Deep Colour: HDMI 1.3 supports 10-bit, 12-bit and 16-bit (RGB or YCbCr) colour depths, up from the 8-bit depths in previous versions of the HDMI specification, for stunning rendering of over one billion colours in unprecedented detail
Broader colour space: HDMI 1.3 adds support for "x.v.Color™", which removes current colour space limitations and enables the display of any colour viewable by the human eye
New mini connector: With small portable devices such as HD camcorders and still cameras demanding seamless connectivity to HDTVs, HDMI 1.3 offers a new, smaller form factor connector option
Lip Sync: Because consumer electronics devices are using increasingly complex digital signal processing to enhance the clarity and detail of the content, synchronization of video and audio in user devices has become a greater challenge and could potentially require complex end-user adjustments. HDMI 1.3 incorporates automatic audio synching capabilities which allow devices to perform this synchronization automatically with total accuracy
New HD lossless audio formats: In addition to HDMI‘s current ability to support high-bandwidth uncompressed digital audio and all currently-available compressed formats (such as Dolby® Digital and DTS®), HDMI 1.3 adds additional support for new lossless compressed digital audio formats Dolby TrueHD and DTS-HD Master Audio™
USA
DE
UK
IT
FR
CH
AT
IE
AU
JP
TW
other
Your