Features & Specifications
- Supports HDTV resolutions of up to 1080p
- Supports DVI-D Single Link resolutions of up to 1900 x 1200 and VGA analogue resolutions of up to 2048 x 1536
- Allows HDCP signals to be 'passed through' from the source device to the display
- Silver finish to complement your existing home cinema equipment
- Maximum cable length from device to switch box: 2m
- Robust metal construction
- Connectors: 5 x DVI-I Female (1 output, 4 input)
- Supplied with Infra-red remote control and battery (CR2025)
- 9V DC, 500mA power supply included
- Operation Temperature: 0~40°C
- Storage Temperature: -20°C ~ 60°C
- Weight: 1.1kg
- Dimensions: 245 x 170 x 50mm (WxDxH)
Connecting HDMI equipped devices
If your devices are equipped with an HDMI connector you can use DVI to HDMI cables or adapters. Please be aware however, that the DVI interface supports display signals only. Therefore, you will need to make separate audio connections from your source to your display/amplifier etc. using our DVI, HDMI and audio connection cables.
Connecting mixed VGA and DVI equipped devices
VGA analogue sources are also supported when used with the correct adapters. However, be aware that the the DVI Switch Remote does not convert analogue to digital signals or vice versa. This means that your display must be equipped with either a VGA input or analogue supporting DVI-I input. For best results, the monitor should also auto switch between active and inactive digital and analogue inputs.
Please note: To connect analogue VGA devices, your display must feature either a 15 Way VGA or a DVI-I (Analogue and digital) input.
When connecting VGA analogue devices, you must use a combination of DVI-I cables and VGA adapters to make the connection from both the device and the display to the DVI Switch Remote. This is because DVI-D cables do not support analogue signals.
Examples:
1. To connect a PC equipped with a VGA output to the DVI IN port on the DVI Switch Remote, you can use either a 2m VGA TO DVI Adapter Cable (LINDY No. 41206, UK only) or a DVI Analogue to VGA Adapter Cable (LINDY No. 41222) and a 15 Way Male to Male S-VGA Cable.
2. To connect the DVI Switch Remote to a display, to enable analogue VGA support, you will need a DVI-I Cable or a DVI-I to DVI-D + VGA Splitter Cable (LINDY No. 41219) if connecting to a display with a separate VGA input.
USA
DE
UK
IT
FR
CH
AT
IE
AU
other
Your